CAS号 [5858-13-9] 生产工艺 4,4’-二苯脲-3,3’-二磺酸
CAS名: Benzenesulfonic acid, 3,3’-(carbonyldiimino)bis[6-amino-
生产工艺文献:
BIOS 1153, 309-310. 4,4’-Diaminodiphenylurea-3,3’-disulphonic acid. (Leverkusen) 译自德文。抄录如下。
反应式: 本人有加注。
4-Oxalyl-p-phenylenediamine-3-sulphonic acid, equivalent to 100 kg. NaNO2, is charged to a vat containing 2400 l. of water and made weakly alkaline by the addition of 40% aqueous caustic soda solution equivalent to 120 kg. 100% NaOH. The solution is screened into a second vat where the volume is made up to 3400 l. Phosgene (120 kg.) is passed in with the simultaneous addition of 130 kg. of soda ash to keep the mass faintly alkaline.
Test: The free amino content by nitrite titration should be less than 1.5%.
The batch is blown to a C.I. tank; heated to 750 and made up to 3950 l. by the addition of 300 kg. of salt and 154 kg. of 100% NaOH as 40% solution. The temperature is maintained at 750 for 3/4 hour.
Test: A nitrite test should give an equivalent of 97% of the material charged.
The solution is cooled to 350 and blown to a tile-lined vat containing 500 l. of water and 200 l. of 191/20Be’ hydrochloric acid. Hydrochloric acid (100 l.) is run in simultaneously to maintain definite Congo acidity. 225 kg. salt are also added.
Test: A sample is filtered in the laboratory and the filtrate estimated with NaNO2. The loss in the filtrate should be not more than 14%
The batch is then filtered. Yield: 800 kg. paste = 63 kg. NaNO2 = 83% theory.
中文摘译文。张澍声。《精细化工中间体工业生产技术》1996年。P. 147. 请见原书。
PB 74025, 1668. Verfahren zur Herstellung von 4,4’-Diamino-diphenylharnstoff-3,3’-disulfosaeure 1946年1月25日 抄录如下。
100 kg Nitrit 4-Amino-1-oxalylamino-2-benzolsulfosaeure (Mol. 260) warden in 2400 l. Wasser eingetragen und mit ca.
75 kg Natronlauge 100% in 40%iger Loesung geloest. Das Volumen wird auf 3200 l. eingestellt. Dann mit
20 kg Soda versetzt. Nun werden
120 kg Phosgen eingeleitet und gleichzeitig und gleichmassig
110 kg Soda zugegeben, so dass die Reaktion schwach alkalisch bleibt. Die fertige Phosgenierung wird in den Verseifungskessel, der aus einen eisernen Ruehrkessel mit einer Eisenschlange besteht, die sowohl mit Dampf als auch mit kaltem Wasser beschiekt werden kann, gezogen. Die wird hier auf 750 angewaermt. Volumen 3900 l. Dann werden 300 kg Steinsalz und
178 kg Natronlauge 100% in 40%iger Loesung zugegeben. Die Temperatur wird 1/4 Stunde bei 750 gehalten. Dann wird auf 350 gekuehlt. Dann wird die Verseifung in die Ausarbeitungsbuette gedrueckt auf folgende Vorlage
500 l. Wasser 200 l. Salzsaeure 19.50Be‘. Wahrend des Zulaufes werden nach ca.
320 l. Salzsaeure 19.50Be‘ bis zur schwach sauren Reaktion, sowie
800 kg Stainsalz zugegeben. Am folgenden Morgen wird auf eine Nutsche isoliert.
Ausbeute: 81.5% der Theorie = 81.5 kg Nitrit = 237 kg 100%ige 4,4‘-Diaminodiphenylharnstoff-3,3-disulfosaeure ( Mol. 402 = 130 Nitrit) 未见有译文。
PB 82232, 635-6. Verfahren zur Herstellung von 4,4‘-Diaminodiphenylharnstoff-3,3‘-disulfosaeure 1946年。同上。未抄录。
日文摘译文。细田豊《理论制造染料化学》1957年。 P. 621-2. 请见原书。
加注: BIOS 1153. 资料未说明译自何处?PB 74025和PB 82232 是工艺摘要原件。日文说明译自82232.
陈忠源 2016年7月20日 于 无锡 明辉国际。 本文地址:http://www.陈忠源化学文库.cn/Article.asp?ID=10000196